GE Telephone 29255 Series User Manual

FOLD  
FOLD  
INSTALLATION  
FOLD  
TROUBLESHOOTING TIPS  
FOLD  
SERVICE  
ATLINKS Communications Canada, Inc. warrants to the  
purchaser or gift recipient that if any manufacturing defect  
becomes apparent in this product within  
WALL MOUNT INSTALLATION  
1. Plug the telephone line cord  
into the jack in the pocket on  
the bottom of the phone.  
Problem  
Solution  
29255 Series  
MODULAR JACK REQUIREMENTS  
1
You need an RJ11(CA11A) type modular  
jack, which is the most common type of  
phone jack and might look like the one  
pictured here. If you don’t have a modular  
jack, call your local phone company to  
find out how to get one installed.  
No dial tone.  
Check hook switch to make  
sure it pops up.  
2
1 year from the original date of purchase, it will be replaced  
free of charge, including return transportation.  
2. Stuff the excess line cord into  
the pocket.  
Won't dial out  
Make sure PULSE/TONE is  
set to correct position.  
Memory Phone  
User's Guide  
This warranty does not include damage to the product resulting  
from accidents, misuse or leaking batteries.  
3
3. Plug the other end of the line  
cord in the wall jack.  
Phone doesn’t ring  
Make sure RINGER switch  
is set to LO or HI.  
You might have too many  
phones on one line.  
Should your product not perform properly during the warranty  
period, either:  
DESKTOP OR TABLETOP INSTALLATION  
1
4. Plug the coiled cord into the  
handset. Plug the other end  
into the jack on the lower end  
of the base.  
1. Return it to the selling dealer with proof of purchase for  
replacement,  
OR  
Feedback when  
This is normal. Power  
2. Remove the batteries (where applicable), and pack product  
complete with accessories in the original carton (or  
equivalent).  
dialing in pulse mode  
fluctuates with phone  
outpulsing.  
5. Slip the mounting holes on the  
bottom of the telephone over  
the wall plate posts and slide  
the base down until the phone  
is firmly in place. (Wall plate is  
not included.)  
4
Can’t be heard by other  
party  
Make sure phone cord is  
securely plugged in.  
Make sure other phones  
aren't off the hook at the  
same time you're using the  
phone. It is normal for the  
volume to drop when  
— Mail prepaid (with proof of purchase) and insured to:  
2
ATLINKS Communications Canada, Inc.  
c/o Thomson multimedia Ltd.  
6
4
7
6. Set the VOLUME switch (on the side of the handset) to the  
desired listening volume.  
6200 Edwards Boulevard  
Mississauga, Ontario Canada L5T 2V7  
3
7. Set PULSE/TONE switch (on the side of the handset) to TONE  
for touch-tone service, or set it to PULSE for rotary service. If  
you don’t know which type of service you have, check with  
the phone company.  
The provisions of this written warranty are in addition to and not  
a modification of or subtraction from the statutory warranties  
and other rights and remedies contained in any applicable  
legislation, and to the extent that any such provisions purport to  
disclaim, exclude or limit any such statutory warranties and  
other rights and remedies, such provisions shall be deemed to  
be amended to the extent necessary to comply therewith.  
additional phones are used  
at the same time.  
8. Slide the RINGER switch (on top of the base) to the desired  
ringer volume.  
5
1. Plug the line cord into the jack in the pocket on the bottom of  
the phone.  
If you are unable to find a qualified servicer for out of warranty  
service, you may write to:  
2. Run the telephone line cord through the guides on the  
bottom of the phone.  
ATLINKS Communications Canada, Inc.  
Thomson multimedia Ltd.  
6
3. Plug the coiled cord into the handset. Plug the other end into  
the jack on the lower end of the base.  
P.O. Box 0944  
Indianapolis, Indiana, U.S.A., 46206-0944  
4. Set PULSE/TONE switch (on the side of the handset) to TONE  
for touch-tone service, or set it to PULSE for rotary service. If  
you don’t know which type of service you have, check with  
the phone company.  
Attach your sales receipt to this booklet for future reference.  
This information is required if service is needed during the  
warranty period.  
5
Mounting  
holes  
PURCHASE DATE  
____________________________________________________________  
5. Slide the RINGER switch (on top of the base) to the desired  
volume.  
7
NAME OF STORE  
____________________________________________________________  
6. Set the VOLUME switch (on the side of the handset) to the  
desired listening volume.  
8
7. Connect the telephone line cord to a modular telephone jack.  
We bring good things to life.  
FOLD  
FOLD  
IMPORTANT INFORMATION  
TELEPHONE OPERATION  
INTERFERENCE INFORMATION  
NOTICE: The Industry Canada label identifies certified equipment. This  
certification means that the equipment meets certain telecommunica-  
tions network protective, operational and safety requirements. The  
Industry Canada does not guarantee the equipment will operate to the  
user’s satisfaction.  
This equipment generates and uses radio frequency energy  
which may interfere with residential radio and television  
reception if not properly installed and used in accordance with  
instructions contained in this manual. Reasonable protection  
against such interference is ensured, although there is no  
guarantee this will not occur in a given installation. If interfer-  
ence is suspected and verified by switching this equipment on  
and off, the user is encouraged to try to correct the interference  
by one or more of the following measures: Reorient the radio/  
television receiver’s antenna, relocate the equipment with  
respect to the receiver, plug the equipment and receiver into  
separate circuit outlets. The user may also wish to consult a  
qualified radio/television technician for additional suggestions.  
This equipment has been fully tested and complies with all limits  
for Class B computing devices pursuant to part 15 FCC Rules  
and Regulations. This apparatus does not exceed the class B  
limits for RF noise emissions specified in the RFI regulations of  
the Industry Canada.  
VOLUME  
REDIAL  
CHAIN DIALING  
You are able to control the listening level with the VOLUME  
switch on the side of the handset. It has 3 levels: normal,  
medium, and high.  
To automatically redial the last number you called:  
1. Pick up the handset to get a dial tone.  
2. Press REDIAL.  
You can link several memory locations in sequence by following  
this example:  
Before installing this equipment, users should ensure that it is  
permissible to be connected to the facilities of the local telecommunica-  
tions company. The equipment must also be installed using an  
acceptable method of connection. The customer should be aware that  
compliance with the above conditions may not prevent degradation of  
service in some situations.  
Number is For  
Memory Location  
Long distance access number  
Authorization code  
7
8
MEMORY  
FLASH  
Each of the memory buttons is capable of storing phone  
numbers that are up to 16 digits. A, B, and C memory locations  
are accessible by one press. Memory locations 1-9 require you  
to press MEM DIAL for access.  
Frequently called long distance number  
9
Press the FLASH button instead of the hook switch to  
activate custom calling services such as call waiting or call  
transfer. Custom calling services are provided by the phone  
company.  
1. Pick up the handset to get a dial tone.  
2. Press MEM DIAL and then press 7.  
3. When you hear the access tone, press MEM DIAL and then  
press 8.  
Repairs to certified equipment should be made by an authorized  
Canadian maintenance facility designated by the supplier. Any repairs  
or alterations made by the user to this equipment, or equipment  
malfunctions, may give the telecommunications company cause to  
request the user to disconnect the equipment.  
STORING A NUMBER IN MEMORY  
1. Pick up the handset.  
2. Press the STORE button.  
3. Dial the number to be stored (up to 16 digits).  
4. Press STORE again.  
5. Press a memory location button (A, B, C, or 1-9).  
6. Remove the memo log from underneath its plastic cover and  
record the name of the person whose number you stored.  
7. Hang up the handset.  
A/B/C  
memory  
location  
buttons  
TEMPORARY  
4. At the next access tone, press MEM DIAL and then 9.  
Users should ensure for their own protection that the electrical ground  
connections of the power utility, telephone lines and internal metallic  
water pipe systems, if present, are connected together. This precaution  
may be particularly important in rural areas.  
TONE  
IMPORTANT: If you make test calls to emergency  
numbers, remain on the line and explain the reason  
for the call to the dispatcher. Also, make these calls in  
off-peak hours, such as early morning or late evening.  
If you have pulse service,  
you can temporarily  
REN NUMBER  
On the bottom of this equipment is a label indicating, among  
other information, the FCC Registration number and Ringer  
Equivalence Number (REN) for the equipment. You must, upon  
request, provide this information to your telephone company.  
CAUTION: Users should not attempt to make such connections  
themselves, but should contact the appropriate electric inspection  
authority, or electrician, as appropriate.  
change from pulse to tone  
service in order to access  
A
B
C
services that require tone  
dialing (such as getting  
information from a local  
bank). After dialing the  
telephone number, press  
and release the tone  
INSERTING A PAUSE IN THE DIALING SEQUENCE  
Use the REDIAL button to add pauses to a dialing sequence, for  
example after you dial 9 for an outside line.  
NOTES: This equipment may not be used on coin service provided by  
the telephone company.  
NOTE: If you make a mistake while storing a number,  
hang up and repeat the storing procedure.  
ABC  
DEF  
The REN is useful in determining the number of devices you may  
connect to your telephone line and still have all of these devices  
ring when your telephone number is called. In most (but not all)  
areas, the sum of the RENs of all devices connected to one line  
should not exceed 5. To be certain of the number of devices you  
may connect to your line as determined by the REN, you should  
contact your local telephone company.  
1
2
3
GHI  
JKL  
MNO  
Party lines are subject to telephone company tariffs and, therefore, you  
may not be able to use your own telephone equipment if you are on a  
party line. Check with your local telephone company.  
4
PQRS  
7
5
6
WXYZ  
9
CHANGING A STORED NUMBER  
To change a stored number, you just replace it with a different  
number using the procedure for storing a number.  
TUV  
8
button, marked with an  
asterisk (*). When you  
hang up, your phone  
HEARING AID COMPATIBILITY  
This telephone system meets FCC/Industry Canada standards for  
Hearing Aid Compatibility.  
OPER  
#
0
*
returns to pulse service.  
MEM DIAL STORE REDIAL  
DIALING A STORED NUMBER  
1. Pick up the handset, and wait for a dial tone.  
FLASH  
2. Press A, B, or C to access those stored numbers. For  
numbers stored at memory locations 1-9, press MEM DIAL  
and then number of the location in which the desired number  
is stored.  
INDUSTRY CANADA NUMBER IS LOCATED ON THE CABINET  
BOTTOM  
REN NUMBER IS LOCATED ON THE CABINET BOTTOM  
ATLINKS Communications Canada Inc.  
MEM  
DIAL  
button  
STORE FLASH REDIAL  
Model 29255 Series  
15405270 (Rev. 3 E/F)  
01-02  
(An Alcatel /Thomson Multimedia Joint Venture)  
© 2001 ATLINKS Communications Canada, Inc.  
Trademark(s) ® Registered  
button  
button  
button  
Marque(s) ® déposée(s)  
Printed in China  
 
FOLD  
FOLD  
FOLD  
FOLD  

Electro Voice Microphone MC150 User Manual
Exide Battery Charger S47 0079 User Manual
Fellowes Paper Shredder HS 660 User Manual
First Alert Smoke Alarm SA511CN2 3ST User Manual
Fisher Price Automobile C3491 User Manual
Fujitsu Computer Accessories B23Q8YA G 02 F User Manual
Gateway Computer Monitor FPD1750 User Manual
Generac Power Systems Portable Generator 0940 1 User Manual
GE Network Router A8950CC User Manual
Gigabyte Network Card GA M55SLI S4 User Manual