Casio Watch MA1212 EA User Manual

MA1212-EA  
Ú ꢀꢁꢂꢃ #!3)/ #/-054%2 #/ꢄꢅ ,4$ꢄ  
Operation Guide 5345  
Using the Stopwatch  
The stopwatch measures elapsed time in 1/10-second increments up to 59 minutes,  
59.9 seconds.  
x
x
Your watch may differ somewhat from the one shown in the illustration.  
Some models may use a combination of hands and rotating disks to indicate  
information. The word “hand” in this section is used to mean both analog hands  
and rotating disks.  
Elapsed time  
Stopwatch 1/10-Second Hand  
A
A
A
A
B
Hour Hand  
Minute Hand  
Start  
Stop  
Re-start  
Stop  
Reset  
Split time  
B
A
A
A
B
B
Click 2  
Start  
Split  
Split release  
Stop  
Reset  
Stopwatch Minute Hand  
Second Hand  
Click 1  
Two finishes  
ꢀꢁ  
A
B
A
B
B
Start  
Split  
First runner  
finishes.  
Stop  
Second runner  
finishes.  
Split release  
Display time of  
second runner.  
Reset  
B
Display time of first  
runner.  
Crown  
Day Indicator  
Stopwatch Second Hand  
Important!  
x
Do not operate the stopwatch with the crown pulled out.  
Stopwatch functions  
Note  
x
An elapsed time operation will stop automatically at the end of 60 minutes.  
To adjust the time setting  
To change the day indicator setting  
Pull the Crown out to Click 1.  
When the second hand is at  
12 o’clock, pull the Crown out to  
Click 2.  
Correcting the 0 Positions of the Hands  
Perform the following procedure if the stopwatch hands do not return to their 0 (zero)  
positions when you reset the stopwatch.  
Rotate the Crown to set the day.  
Rotate the Crown to change the  
time setting.  
Pull the Crown out to Click 2.  
Push the Crown back in.  
Note  
x
Push the Crown back in.  
The day indicator setting uses a 31-  
day month. Make adjustments for  
months of shorter lengths.  
Avoid changing the day indicator  
setting between the hours of 9  
p.m. and 1 a.m. Otherwise, the day  
indicator may not change correctly at  
midnight.  
Press A to move the  
x
clockwise.  
Stopwatch 1/10-Second Hand  
Holding down A will move the hand at high speed.  
Press B to move the clockwise.  
Note  
Stopwatch Second Hand  
Holding down B will move the hand at high speed.  
The is synchronized with the  
x
x
Take care that you set the correct AM  
or PM time.  
x
x
.
Stopwatch Minute Hand  
Stopwatch Second Hand  
x
When changing the time, move the  
minute hand four or five minutes past  
your final setting, and then back it up  
to the setting you want.  
After all of the hands are the way you want, push the Crown back in.  
Important!  
Crown Operations  
Crown  
x
Timekeeping stops while the crown is pulled out. Correct the current time setting  
after performing the above operation.  
Some water-resistant models (100 meters, 200 meters)  
have a screw-in crown. When you need to perform a crown  
operation, rotate it towards you to unscrew it. Then pull  
the crown out. Avoid applying undue force when pulling.  
The watch loses its water resistance while the crown is  
unscrewed. After performing a crown operation, fully screw  
the crown back in.  
Specifications  
Accuracy: 20 seconds average per month  
Loosen  
Stopwatch: Measuring Capacity: 59'59.9" (60 minutes)  
Measuring Unit: 1/10 second  
If your watch has a rotary bezel...  
Start  
Measurements: Elapsed time; split time; two finishes  
You can rotate the bezel to align its  
mark with the  
Battery: One silver oxide battery (Type: SR920SW)  
Battery Life: Approximately 2 years (60 minutes stopwatch operation per day)  
minute hand. Then you will be able to tell how much  
time has elapsed since aligning the mark.  
Elapsed time  
Current  
1
 

Belkin Network Router N450DB User Manual
Black Decker Griddle AM100 Series User Manual
Blue Rhino Safety Gate RHO9054 User Manual
Bobrick Bathroom Aids B 5181 User Manual
Boston Acoustics Speaker System 2 User Manual
Bravetti Fryer XFR21H User Manual
Breville Coffeemaker BES250XL User Manual
Brother Cell Phone BCL D70 User Manual
Canon Printer C3500 User Manual
Casablanca Fan Company Outdoor Ceiling Fan 69xxD User Manual