Cambridge Audio TV Converter Box azur DacMagic User Manual

azur  
DacMagic  
Upsampling digital to analog converter  
User’s manual  
2
 
azur  
DacMagic  
Introduction  
Thank you for purchasing this DacMagic Upsampling Digital to Analog Converter. We are confident  
that you will enjoy many years of listening pleasure from it.  
The DacMagic features ATFTM (Adaptive Time Filtering), an up-sampling process developed in  
conjunction with Anagram Technologies of Switzerland to intelligently interpolate incoming audio data  
(of between 16-24 bits, 32-96kHz) to 24bit/192kHz through the use of a 32bit Texas Instruments DSP  
(Digital Signal Processor). The ATF system applies sophisticated polynomial curve-fitting interpolation  
to create the extra data points and incorporates a time domain model which adaptively generates the  
new data in the temporal domain, dramatically reducing digital jitter, even that present in the input audio.  
As with our high-end CD players, our proprietary Dual Differential Virtual Earth Balanced filter topology  
is used, configured as a low-order two pole linear-phase Bessel filter to take advantage of the high  
sampling rate achieved. Two very high quality Wolfson WM8740 24bit DAC ICs are used in dual  
differential mode. Since each channel has its own DAC to process information, completely separate  
and symmetrical analog filter circuitry can be implemented. These allow both left- and right-channel  
circuitry to operate identically, ensuring the DacMagic delivers fantastic sound-staging and stereo-  
imaging properties.  
Two digital inputs are fitted (both featuring S/P DIF and TOSLINK) and allow a wide range of digital  
sources to be connected. In addition, a USB input enables the DacMagic to be connected to a PC  
and act as a very high quality DAC/Soundcard, offering genuine HiFi-quality playback from your  
desktop, media PC, etc. A digital output is fitted which passes through the selected digital source for  
recording purposes (no up-sampling performed).  
Your DacMagic can only be as good as the system it is connected to. Please do not compromise on  
your amplifier, speakers or cabling. Naturally, we particularly recommend amplification from the  
Cambridge Audio range. Your dealer can also supply excellent quality Cambridge Audio interconnects  
to ensure your system realises its full potential.  
Thank you for taking the time to read this manual; we recommend you keep it for future reference.  
Matthew Bramble  
Cambridge Audio Technical Director  
and the DacMagic design team  
3
 
Important safety instructions  
For your own safety please read the following important safety instructions carefully before attempting  
to connect this unit to the mains power supply. They will also enable you to get the best performance  
from and prolong the life of the unit:  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has  
two blades with one wider than the other. A grounding-type plug has two blades and a third  
grounding prong. The wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience  
receptacles and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use with only the cart, stand, tripod, bracket, or table specified by the manufacturer, or  
sold with the apparatus. When a cart is used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as the power-supply adaptor having been damaged, liquid has  
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain  
or moisture, does not operate normally, or has been dropped.  
4
 
azur  
DacMagic  
WARNING – To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.  
The unit must be installed in a manner that makes disconnection of the mains plug from the mains  
socket outlet (or appliance connector from the rear of the unit) possible. Where the mains plug is  
used as the disconnect device, the disconnect device shall remain readily operable. Only use the  
power supply adaptor supplied with this unit.  
Please ensure there is ample ventilation (at least 5cm clearance all round).  
This unit must not be used near water or exposed to dripping or splashing water or other liquids.  
No objects filled with liquid, such as vases, shall be placed on the unit.  
WEEE symbol  
The crossed-out wheeled bin is the European Union symbol for indicating separate collection  
for electrical and electronic equipment. This product contains electrical and electronic  
equipment which should be reused, recycled or recovered and should not be disposed of  
with unsorted regular waste. Please return the unit or contact the authorised dealer from  
whom you purchased this product for more information.  
CE mark  
This product complies with European Low Voltage (2006/95/EC) and Electromagnetic  
Compatibility (89/336/EEC) Directives when used and installed according to this instruction  
manual. For continued compliance only Cambridge Audio accessories should be used with this  
product and servicing must be referred to qualified service personnel.  
C-Tick mark  
This product meets the Australian Communications Authority’s Radio communications and  
EMC requirements.  
Ross Test Stamp  
This product meets Russian electronic safety approvals.  
5
 
FCC regulations  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED  
BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE  
USER AUTHORITY TO OPERATE THE EQUIPMENT.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures  
– Re-orient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected  
– Consult the dealer or an experienced radio/TV technician for help.  
Ventilation  
IMPORTANT – The unit will become warm when in use. Do not stack multiple units on top of each  
other. Do not place in an enclosed area such as a bookcase or in a cabinet without sufficient  
ventilation.  
Positioning  
Choose the installation location carefully. Avoid placing it in direct sunlight or close to a source of heat.  
No naked flame sources, such as lighted candles, should be placed on the unit. Also avoid locations  
subject to vibration and excessive dust, cold or moisture. The unit can be used in a moderate climate.  
6
 
azur  
DacMagic  
This unit must be installed on a sturdy, level surface. Do not place in a sealed area such as a bookcase  
or in a cabinet. Any space open at the back (such as a dedicated equipment rack) is fine, however.  
Do not place the unit on an unstable surface or shelf. The unit may fall, causing serious injury to a child  
or adult as well as serious damage to the product. Do not place other equipment on top of the unit.  
Due to stray magnetic fields, turntables or CRT TVs should not be located nearby due to possible  
interference.  
Electronic audio components have a running in period of around a week (if used several hours per day).  
This will allow the new components to settle down and the sonic properties will improve over this time.  
Power sources  
The unit should be operated only from the type of power source indicated on the marking label. If you  
are not sure of the type of power-supply to your home, consult your product dealer or local power  
company.  
Overloading  
Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.  
Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation and  
broken plugs are dangerous. They may result in a shock or fire hazard.  
Be sure to insert each power cord securely. To prevent hum and noise, do not bundle the interconnect  
leads with the power cord or speaker leads.  
Cleaning  
To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any cleaning fluids containing  
alcohol, ammonia or abrasives. Do not spray an aerosol at or near the unit.  
Servicing  
These units are not user serviceable. Never attempt to repair, disassemble or reconstruct the unit if  
there seems to be a problem. A serious electric shock could result if this precautionary measure is  
ignored. In the event of a problem or failure, please contact your dealer.  
7
 
Rear panel connections  
DacMagic Upsampling DAC  
Caution  
Serial Number Label Removed  
5
Designed in the UK, Made in China  
3
4
Incorporating Q5 from:  
ANAGRAM  
6
Left  
TECHNOLOGIES  
Digital Outputs  
Digital Input 1  
Digital Input 2  
USB In  
12V 1500mA  
1
Right  
7
Use supplied  
PSU only!  
Unbalanced  
Output  
S/P DIF  
Co-axial  
Toslink  
Optical  
S/P DIF  
Co-axial  
Toslink  
Optical  
S/P DIF  
Co-axial  
Toslink  
Optical  
Right — Balanced Output — Left  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  
1) This device may not cause harmful interference;  
Manured in an ISO9001 approved facility  
2
2) This device must accept any interference, including interference that may cause undesired operation.  
1 Unbalanced Audio Outputs  
Single-ended conventional stereo outputs for connection to the line-level phono/RCA inputs of an  
amplifier.  
2
Balanced Audio Outputs  
The DacMagic also features true balanced (XLR) outputs. This is a higher quality output that can  
reject noise and interference with equipment with balanced inputs. These balanced outputs are  
ideally suited for connection to the Cambridge Audio 840A or 840E amplifiers. XLR connectors should  
be wired as follows:  
Pin 1 – Ground; Pin 2 – Hot (in-phase); Pin 3 – Cold (phase-inverted).  
3
Digital Outputs  
The digital outputs allow a digital recording device to be connected. These outputs loop or pass-  
through unprocessed digital audio from the selected digital input. Two types are available (both the  
co-axial and the optical are active concurrently and can be used to connect and run equipment at the  
same time):  
S/P DIF co-axial – to obtain best results, use a high quality 75 ohm digital RCA interconnect cable (not  
one designed for normal audio use).  
8
 
azur  
DacMagic  
TOSLINK optical – use a high quality TOSLINK fibre-optic interconnect cable designed specifically for  
audio use. To achieve the best results we always recommend using high quality Cambridge Audio  
leads, which are guaranteed for life.  
Note: These outputs are pass-through only; there is no upsampling or any other modification done to  
the LPCM input signal.  
4
5
Digital Inputs 1 and 2  
The DacMagic is fitted with two sets of digital inputs which enable the connection of source  
components. Each input has both S/P DIF and TOSLINK types fitted.  
Only one of the two types for each input should be connected at any one time. If both the optical and  
co-axial outputs have connections made to them (even if only one is attempting to function), neither  
will work.  
S/P DIF co-axial – to obtain best results, use a high quality 75 ohm digital RCA interconnect cable (not  
one designed for normal audio use).  
TOSLINK optical – use a high quality TOSLINK fibre-optic interconnect cable designed specifically for  
audio use.  
Note: This unit only accepts two-channel LPCM digital audio (e.g. Dolby Digital 2.0). You cannot  
connect a Dolby Digital 5.1 or a DTS signal as they will not be recognised. If you wish to connect a DVD  
or similar device, please ensure that the sound output of your player is set to two-channel PCM.  
6
USB In  
USB ‘Type B’ input allowing direct connection to a PC via a Type B to Type A USB lead. The DacMagic’s  
operation is independent of your PC soundcard – it will operate whether your PC has a soundcard  
or not.  
7
AC 12V 1.5A Power Adaptor Socket  
Once you have completed all connections, plug the supplied power adaptor into the DacMagic.  
Important Note: Use the supplied power supply unit ONLY.  
9
 
Front panel controls  
On/ Off  
Source  
Filter / Phase  
Phase  
Incoming Sample Rate  
Lin  
32  
44.1  
48  
88.2  
96  
Digital 1  
Min  
1
Digital 2  
Steep  
4
5
2
3
DacMagic  
Upsampling DAC  
1
Power On/Off  
Switches the unit between On and Off.  
2
Source  
Press to select between USB playback or Digital Inputs 1 and 2. The corresponding LED will light up  
to show which source has been selected.  
3
Filter/Phase Select  
Momentarily press to select between three different filter modes: linear phase, minimum phase or  
steep (see page 18 for details). The corresponding LED will light up to show which filter has been  
selected.  
10  
 
azur  
DacMagic  
4
Phase  
Indicates the output phase selected. Press and hold the Filter/Phase select button for approximately  
two seconds to select normal or inverted phase output. When the LED lights up, the phase is inverted  
by the DacMagic.  
If you suspect that your source material or amplifier, etc., is inverting the phase of the musical signal,  
you can use this function to re-invert the audio and regain absolute positive phase.  
5
Incoming Sample Rate  
In the presence of an incoming digital stream, the relevant LED will light up to indicate the incoming  
digital sampling frequency (between 32kHz and 96kHz LPCM).  
11  
 
Audio output connections  
Note: Do not turn on the unit until all connections have been made.  
DacMagic  
Balanced Output  
R
L
L
Digital Outputs  
Digital Inputs  
Digital Inputs  
R
Unbalanced  
Output  
USB In  
AC adaptor  
OR  
Amplifier  
Unbalanced  
Input  
L
L
R
Balanced  
Input  
R
Use either the unbalanced (RCA/Phono) or balanced (XLR) outputs of the DacMagic. The XLR output  
is slightly better in quality as it can reject interference and noise in the cable connection and is the  
preferred option if your amplifier features balanced XLR inputs. It is possible to use the RCA phono  
connections and the XLR balanced connections at the same time, e.g. for connecting to different  
amplifiers or multi-room operations.  
12  
 
azur  
DacMagic  
Digital audio input connections  
Note: Do not turn on the unit until all connections have been made.  
DacMagic  
Balanced Output  
R
L
L
Digital Outputs  
Digital Inputs  
Digital Inputs  
R
Unbalanced  
Output  
USB In  
AC adaptor  
OR  
CD/DVD player  
Digital Outputs  
Connect your digital source to Digital Input 1. Either S/P DIF co-axial or TOSLINK optical types can be  
used, each being of equal quality.  
Important Note: Only connect one co-axial OR optical cable to each digital input. The  
unit will not operate if both connections are made (even if only one is active).  
13  
 
PC-USB connections  
Note: Do not turn on the unit until all connections have been made.  
PC  
DacMagic  
Balanced Output  
R
L
L
Digital Outputs  
Digital Inputs  
Digital Inputs  
R
Unbalanced  
Output  
USB In  
AC adaptor  
USB ‘B–A’ type lead  
14  
 
azur  
DacMagic  
Connect a USB ‘B–A’ type lead (as illustrated at left) from the DacMagic’s USB input to one of the USB  
ports on the PC. This is the normal type of USB lead with an oblong plug at one end and a square plug  
at the other. Switch on the DacMagic using the front panel On/Off switch and make sure that the  
USB input is selected (USB LED lit). The Windows “Found New Hardware” dialogue bubble should  
now appear at the bottom right-hand side of the Windows desktop. The description of the DacMagic  
will be displayed as “USB audio device”. Installation should be automatic and no driver disc is  
required. After a few seconds the message “Your new hardware is installed and ready to use” should  
appear to confirm that installation has been successful.  
Important Note: The PC’s previous audio output device should now be temporarily disabled and the  
DacMagic becomes the default audio playback device for the PC. This can be confirmed in the  
Control Panel’s Sounds, Speech and Audio Devices properties window under the Volume tab.  
The DacMagic is described as a “C-Media USB Headphone Set” as we use a C-Media USB interface  
IC running a headphone (i.e. two-channel) profile.  
If you wish to disconnect your DacMagic and return to using your previous soundcard, etc., simply  
disconnect it or switch off the power on the front panel.  
If the PC fails to disable the DacMagic and automatically re-enable your default soundcard, you can  
manually disable the DacMagic in the hardware device manager. To do this, navigate to the Device  
Manager (click Start — Control Panel — (Vista: Performance and Maintenance —) System — Hardware  
— Device Manager in Windows XP). Scroll down the device manager window and expand the heading  
Sound, Video and Game Controllers to display a list of the connected devices. The DacMagic will be  
listed as “USB Audio Device”. Click on this description to highlight in blue and then click on the Disable  
icon ( ) at the top of the window. A warning message will appear: “Disabling this device will cause  
it to stop functioning. Do you really want to disable it?” Click Yes to disable the DacMagic. The previous  
audio playback device will now be re-instated by Windows.  
Note: As Windows operating systems evolve, the path sequence to the device manager may change.  
However, the DacMagic will always appear as a “USB Audio Device” in the Sound, Video and Game  
Controllers window.  
Note: It is also possible to disable the DacMagic in the device manager by right-clicking on the  
highlighted “USB Audio device” and then clicking Disable from the sub-menu window.  
15  
 
Digital audio output connections  
Note: Do not turn on the unit until all connections have been made.  
DacMagic  
Balanced Output  
R
L
L
Digital Outputs  
Digital Inputs  
Digital Inputs  
R
Unbalanced  
Output  
USB In  
AC adaptor  
OR  
Digital recorder  
Digital Inputs  
If it is desired to loop out the currently selected digital audio for recording on a suitable device (MD,  
CD-R, etc.), you can connect either an S/P DIF co-axial or TOSLINK optical cable to the digital outputs  
as shown, each type being of equal quality. Both output types are active concurrently and both can  
be used simultaneously to run equipment.  
Note: There is no upsampling performed on the digital output pass-through.  
16  
 
azur  
DacMagic  
Operating instructions  
The DacMagic can be sited in two different positions, as shown in the accompanying diagram. It can be  
placed horizontally by fitting the four small individual feet, or vertically by using the large rubber ‘foot’.  
Power on the DacMagic using the On/Off button on the front panel. After 4-5 seconds, the unit will  
unmute and the current Source and Filter type will be shown by the front panel LEDs. Using  
the Source button on the front panel, select the appropriate digital input, i.e. USB  
Digital 2, that you wish to listen to.  
, Digital 1 or  
Switch on the external source input, e.g. CD player, DVD player, etc.  
The sampling frequency of the Digital Input will be displayed on the front  
panel (e.g. for a CD player – 44.1kHz). Momentarily press the Filter/Phase  
selector button to cycle between three different filter modes.  
Start playback of the source equipment. The DacMagic will output analogue  
audio from the Unbalanced/Balanced outputs upsampled to 192kHz 24bit.  
A ‘raw’ S/P DIF co-axial and TOSLINK optical digital output is also provided.  
These outputs can be used to connect a compatible digital recorder, e.g.  
CD-R/MD, etc. The DacMagic is compatible with Digital Stereo LPCM of a  
sampling frequency between 32-96kHz.  
Note: Being a stereo device, this unit does not decode 5.1 Dolby Digital or  
DTS Bitstreams from a DVD player, etc. When receiving a multi-channel digital  
input, the analogue audio outputs are muted. However, a 5.1 DD or DTS  
Bitstream will pass-through to the digital outputs.  
Horizontal placement  
Vertical placement  
17  
 
Filters  
The DacMagic DSP has three different Filter functions: Linear Phase, Minimum Phase and Steep. All  
three filters are highly sophisticated audiophile topologies, optimised specifically for audio playback.  
In our opinion, these filters offer excellent sound quality but differ subtly in optimisation, hence we’ve  
made all three available to you.  
Note: For clarity, all diagrams show the theoretical response of the DSP itself, excluding any analog  
filtering at the DAC output or the anti-aliasing filter applied during recording and/or mastering of the  
digital source.  
Linear Phase Filter  
Frequency response  
20  
0
-20  
-40  
-60  
-80  
-100  
-120  
-140  
-160  
-180  
-200  
0
0.1  
0.2  
0.3  
0.4  
0.5  
0.6  
0.7  
0.8  
0.9  
1
frequency/FS (input sampling rate)  
18  
 
azur  
DacMagic  
The Linear Phase filter is a highly regarded audio filter offering low ripple in both the pass and stop  
bands, and what is known as constant group delay. Constant group delay means that audio signals  
of all frequencies are always delayed by the same amount when passing through the filter. All audio  
is therefore fully time-coherent at the output.  
The trade-off with this type of filter is that due to internal feed-forward in the DSP, its impulse response  
will exhibit some pre-ringing. In other words, when excited with a theoretical impulse, the output has  
both a small amount of pre- and post-spike amplitude ringing (albeit well damped).  
Impulse response  
0
0
20  
40  
60  
80  
100  
120  
140  
160  
180  
Time (samples)  
19  
 
Minimum Phase Filter  
Frequency response  
20  
0
-20  
-40  
-60  
-80  
-100  
-120  
-140  
-160  
-180  
-200  
0
0.1  
0.2  
0.3  
0.4  
0.5  
0.6  
0.7  
0.8  
0.9  
1
frequency/FS (input sampling rate)  
20  
 
azur  
DacMagic  
The Minimum Phase filter is another highly regarded audio filter that offers even lower ripple in the  
pass and stop bands. Unlike the Linear Phase filter, group delay is not constant so some time-  
coherence is lost; however, phase shift is low and the particular benefit with this filter is that the  
impulse response exhibits no pre-ringing.  
Impulse response  
0
0
20  
40  
60  
80  
100  
120  
140  
160  
180  
Time (samples)  
21  
 
Steep Filter  
Frequency response  
20  
0
-20  
Steep filter  
-40  
-60  
Linear phase filter  
-80  
-100  
-120  
-140  
-160  
-180  
-200  
0
0.1  
0.2  
0.3  
0.4  
0.5  
0.6  
0.7  
0.8  
0.9  
1
frequency/FS (input sampling rate)  
22  
 
azur  
DacMagic  
Our Steep filter is a linear phase filter that has been optimised for stop band attenuation of close-in  
aliasing images. Here we have traded a little attenuation of the very highest frequency response (-2dB  
at 20kHz) and a little more pre- and post-ringing for a very steep attenuation just outside the pass  
band. The Steep filter is able to attenuate aliasing at 22kHz by some 80dB.  
Impulse response  
0
0
20  
40  
60  
80  
100  
120  
140  
160  
180  
Time (samples)  
Note: All filters exhibit the same ultimate roll-off of approximately 140dB.  
23  
 
The following table shows the filter stop band attenuation:  
Linear Phase Minimum Phase  
Steep  
-2dB  
Roll-off at 20kHz  
Roll-off at 22kHz  
Ultimate roll-off  
-0.1dB  
-10dB  
140dB  
-0.1dB  
-10dB  
140dB  
-82dB  
140dB  
We encourage you to experiment with the filters to determine which sound best to your ears and  
using your source equipment/programme material. The DacMagic remembers and recalls the selected  
filter type for each input individually, making it possible, for example, to select Steep for the USB input  
and Linear Phase for Digital Input 1, and so on.  
24  
 
azur  
DacMagic  
Technical specifications  
D/A converters  
Dual Wolfson WM8740 24bit DACs  
Digital filter  
Texas Instruments TMS 320VC5501 DSP  
upsampling to 24bit 192kHz  
Analogue filter  
2-Pole Dual Differential Bessel Double Virtual  
Earth Balanced  
Frequency response  
20Hz to 20kHz ( 0.1dB)*  
<0.001% 24bit  
<0.001%  
THD @ 1kHz 0dBFs  
THD @ 1kHz -10dBFs  
THD @ 20kHz 0dBFs  
<0.002%  
S/N ratio  
-112dBr  
Total correlated jitter  
Crosstalk @ 1kHz  
<130pS  
< -100dB  
Crosstalk @ 20kHz  
< -90dB  
Output impedance  
<50ohms  
Output level (unbalanced)  
Output level (balanced)  
Digital input word widths supported  
Digital input sampling frequencies supported  
Audio output upsampling  
Dimensions (H x W x D)  
2.1V rms  
4.2V rms (2.1V per phase)  
16-24bit**  
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz  
Fixed 24bit 192kHz  
52 x 215 x 191mm  
(2.0 x 8.6 x 7.6”)  
Weight  
1.2kg/2.6lbs  
*
Steep filter disabled  
**16bit for USB  
25  
 
Troubleshooting  
There is no power  
Ensure the supplied AC adaptor is connected securely to the PSU socket on the rear panel.  
Ensure that the correct mains transformer is being used and that it complies with the local electrical  
supply.  
Ensure the mains plug is fully inserted into the wall socket and is switched on.  
There is no sound  
Ensure that the amplifier is set correctly.  
Check that the interconnects are inserted correctly.  
Check that the correct digital input is selected (Incoming Sample Rate LED should be on).  
A low hum or buzzing sound can be heard  
Power cords or lighting placed near this product.  
Analogue inputs are not securely connected.  
Visit www.cambridge-audio.com and register to receive notification of future hardware and software releases.  
This guide is designed to make installing and using this product as easy as possible. Information in this document has  
been carefully checked for accuracy at the time of printing; however, Cambridge Audio's policy is one of continuous  
improvement, therefore design and specifications are subject to change without prior notice. If you notice any errors  
please feel free to email us at: [email protected]  
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual  
may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the  
manufacturer. All trademarks and registered trademarks are the property of their respective owners.  
© Copyright Cambridge Audio Ltd 2008  
26  
 
azur  
DacMagic  
Limited warranty  
Cambridge Audio warrants this product to be free from defects in materials and workmanship (subject  
to the terms set forth below). Cambridge Audio will repair or replace (at Cambridge Audio's option) this  
product or any defective parts in this product. Warranty periods may vary from country to country.  
If in doubt consult your dealer and ensure that you retain proof of purchase.  
To obtain warranty service, please contact the Cambridge Audio authorised dealer from which you  
purchased this product. If your dealer is not equipped to perform the repair of your Cambridge Audio  
product, it can be returned by your dealer to Cambridge Audio or an authorised Cambridge Audio service  
agent. You will need to ship this product in either its original packaging or packaging affording an equal  
degree of protection.  
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is  
within the warranty period, must be presented to obtain warranty service.  
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this  
product or (b) this product was not purchased from a Cambridge Audio authorised dealer. You may call  
Cambridge Audio or your local country Cambridge Audio distributor to confirm that you have an unaltered  
serial number and/or you made a purchase from a Cambridge Audio authorised dealer.  
This Warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse,  
negligence, commercial use, or modification of, or to any part of, the product. This Warranty does not  
cover damage due to improper operation, maintenance or installation, or attempted repair by anyone  
other than Cambridge Audio or a Cambridge Audio dealer, or authorised service agent which is authorised  
to do Cambridge Audio warranty work. Any unauthorised repairs will void this Warranty. This Warranty  
does not cover products sold AS IS or WITH ALL FAULTS.  
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF  
THE CONSUMER. CAMBRIDGE AUDIO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN THIS PRODUCT. EXCEPT TO THE  
EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS  
AND IMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF  
MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.  
Some countries and US states do not allow the exclusion or limitation of incidental or consequential  
damages or implied warranties so the above exclusions may not apply to you. This Warranty gives you  
specific legal rights, and you may have other statutory rights, which vary from state to state or country to  
country.  
For any service, in or out of warranty, please contact your dealer.  
27  
 
Cambridge Audio is a brand of Audio Partnership Plc  
Registered Office: Gallery Court, Hankey Place  
London SE1 4BB, United Kingdom  
Registered in England No. 2953313  
© 2008 Cambridge Audio Ltd  
 

Belkin Switch F1DP108Gea User Manual
Blanco Indoor Furnishings 501 103 User Manual
Bosch Power Tools Router 0601613639 User Manual
Broan Ventilation Hood 678 User Manual
Bryant Furnace 315AAV User Manual
Canon Camcorder ZR200 User Manual
Carrier Water Pump 17CB User Manual
Casio Watch MA0308 B User Manual
Chevrolet Automobile 2010 Silverado Hybrid User Manual
Christie Digital Systems Projector LWU420 User Manual