AMX Network Card Prestige User Manual

Quick Start Guide  
Mio Modero® Prestige  
Overview  
LED  
The Mio Modero Prestige (FG5798-01xx, single style; FG5798-02xx, double style; xx  
indicates color selection) provides a wide range of control capabilities in the form of  
keypads that are as adept as they are elegant. Each device is available as single style  
(8 button max) or double style (16 button max).  
You need KeypadBuilder to properly program these devices. The application and  
documentation are available from www.amx.com.  
AXlink  
3.5 mini Phoenix  
connector  
Prestige  
Button  
Button  
Window  
PWR+  
Screw  
holes  
Mounting Frame  
8 position mini  
DIP switch  
Notch to pry  
faceplate free  
(Rear Single)  
(Front Single)  
8 position mini  
DIP switch  
AXlink  
3.5 mini Phoenix  
connector  
Screw  
holes  
PWR+  
Prestige  
Capped Buttons  
Face Plate  
Notch to pry  
faceplate free  
FIG. 1 Mio Modero Single Style Prestige  
Specifications  
The Mio Modero device family keypad specifications are as follows:  
(Rear Double)  
Specifications  
FIG. 2 Mio Modero Front and Rear Components  
Power:  
12 vDC, 70 - 230 mA (range depending on device type and number of  
buttons)  
Changing Buttons  
The Mio Modero Prestige ships with sheets of common menu items and icons for  
creating inserts for single and double buttons.  
Front Panel  
Components:  
• Pushbuttons - a maximum of 8 buttons on the single style and 16  
buttons on the double style, with a direct LED light.  
1.  
2.  
If connected, disconnect the power supply.  
Place a flathead screwdriver in the notch at the bottom right of the Mio Modero,  
and pry the faceplate from the mounting frame.  
Rear Panel  
Components:  
• DIP switch - 8 position mini DIP switch used to set the device address  
for the keypad on the AXlink Bus.  
• Wiring connection - 4 pin 3.5mm Phoenix AXlink connector.  
3.  
4.  
On the back of the faceplate locate the button access points, outlined with white  
circles. Using a straightened paperclip, poke through the button access points  
until the buttons pop free.  
The Prestige buttons are comprised of three parts, the frame, window, and back  
insert. From the front of the button, use your thumb to poke the window and back  
insert out of the frame. See FIG. 3.  
Dimensions  
(HWD):  
• Single style - 4.46" x 2.71" x .57" (113.28 mm x 68.83 mm x 14.48 mm)  
• Double style - 4.46" x 4.39" x .57" (113.28 mm x 111.51 mm x 14.48  
mm)  
Weight  
(range):  
.25 lbs (.11 kg) - .50 lbs (.23 kg) Style and number of buttons will decide  
weight.  
Operating  
Environment:  
• Operating Temperature: 0° to 50° C (32° to 122° F)  
• Storage Temperature: -10° to 70° C (14° to 158° F)  
Back Insert  
Window  
Mounting:  
Mounts into US and a majority of International single gang back boxes.  
Included  
Accessories:  
• Single style mounting kit (KA-5795-01)  
• Double style mounting kit (KA-5795-02)  
• Mylar kit - Sheets of common menu items and icons for creating inserts  
for single and double buttons. Available in either black, white, or beige.  
(66-5798-01WH, White; 66-5798-01BG, Beige; 66-5798-01BL, Black)  
• Phoenix Connector (41-5045)  
Optional  
Accessories:  
• Accent Frame (for some larger wallboxes):  
Prestige Colors (xx indicates color selection) -  
FG5795-08xx (single button); FG5795-09xx (double button)  
Frame  
Printed  
Label  
• Custom buttons:  
Prestige Colors (xx indicates color selection) - FG5798-05xx (4  
single buttons); FG5798-06xx (2 double buttons)  
FIG. 3 Prestige Button Components  
Available Color Schemes  
The Mio Modero device family is available in a range of colors. The Prestige supports  
these color schemes, Black (BL), White (WH), and Beige (BG).  
5.  
Snap the widow into the frame and then place the printed labels inside each  
button.  
6.  
7.  
8.  
Snap the back inset to the window and frame.  
Insert the buttons into their proper location on the faceplate.  
If the power supply was disconnected in Step 1, reconnect and return power to  
the device.  
Installation  
Note: Before touching the device, discharge the static electricity from your body by  
touching a grounded metal object.  
The basic front and rear components of the Mio Modero are as follows:  
9.  
Snap the faceplate on the mounting frame.  
Be certain to reprogram the Mio Modero to match the new button arrangement; use  
KeypadBuilder to assign the locations. See the KeypadBuilder Instruction Manual  
available at www.amx.com.  
 
   

Abocom Switch GS400 User Manual
Actiontec electronic Network Router 0530 0276 000 User Manual
Aiphone Intercom System YAW RB User Manual
Air King Vacuum Cleaner AKCVQZ99 User Manual
AKG Acoustics Headphones K 701 User Manual
American Dryer Corp Clothes Dryer AD 120ES III User Manual
Athena Technologies Weather Radio L User Manual
Atlona Satellite Radio AT HD4 100SR User Manual
Audiovox Automobile Electronics ACAM350 User Manual
Badger Basket Compact Excavator 460 User Manual