Philips Universal Remote 14PV184 05 User Manual

&
OPERATING INSTRUCTIONS IN BRIEF  
The remote control  
Front of the set  
STANDBY m  
CLEAR  
m
Standby  
Standby  
Reset/clear  
P p  
Programme number Plus/Minus  
Volume control  
0-9  
Digit buttons 0-9  
’VIDEOPlus+’ programming  
TIMER programming on the set  
Call menu  
Sp  
5
SV/V+  
Record  
TIMER k  
MENU  
H
h
Rewind/Reverse scanning  
Pause/Stop  
OK  
Confirm button  
G
D/C/A/B  
Sp  
P p  
Playback  
Menu left/right/up/down  
Volume control  
I
J
Forward wind/ Forward scanning  
Cassette eject  
Programme number Plus/Minus  
Mute sound  
MUTE y  
GPLAY  
H
w
Headphones socket  
Audio input socket  
Video input socket  
Playback  
AUDIO  
VIDEO  
Rewind/Reverse scanning  
Pause/Stop  
STOP h  
I
Forward wind/ Forward scanning  
Index search  
INDEX E  
RECORD n  
STILL R  
TRANSP. -  
TELETEXT e  
CLOCK .  
Record  
Still picture  
TELETEXT transparent  
TELETEXT on/off  
TELETEXT clock time  
In TELETEXT you can store the relevant page with the  
OK  
button.  
Selecting TELETEXT functions: when you are in  
MENU  
TELETEXT, press the  
button. Select the  
D
C
required function with the  
OK  
and the  
buttons.  
Confirm with the  
button.  
 
OPERATING INSTRUCTIONS PHILIPS 14PV184/05  
Congratulations on the purchase of one of the most  
sophisticated and simple-to-use television/video recorder  
combinations (TV Combi) on the market. With this TV Combi  
Contents  
Page  
1. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Connecting additional equipment . . . . . . . . . . . . . . . . . . . 3  
Emergency interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
User guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Making standard settings . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Setting the clock and date . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
you can record and play VHS-standard cassettes.  
2. PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Please take the time to read this operating manual before  
using your TV Combi.  
Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
3. RECORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Programming with ’VIDEOPlus+’ . . . . . . . . . . . . . . . . . . . . 7  
Safety instructions and other notes  
4. SPECIAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
On Screen Display (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Sleep function (switch off) . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Switch set on function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Child lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 10  
Danger: high voltage! Do not open the set. The set does not  
contain any components that can be repaired by the customer.  
When the appliance is connected to the power supply there are  
some components that are constantly operational. To switch off  
the set completely you must disconnect it from the power supply.  
Note that this power pack is designed for a power supply of  
220-240V/50Hz.  
Ensure that air can circulate freely through the ventilation slots  
on the set.  
Ensure that no objects or liquids enter the set. If liquid is spilt into  
it, disconnect the set immediately from the power supply and call  
the After-sales Service for advice.  
The set should not be used immediately after transportation from  
a cold to a hot area or vice versa, or in conditions of extreme  
humidity.  
After unpacking the set, it should be allowed to acclimatize for at  
least three hours before installation.  
These operating instructions have been printed on nonpolluting  
paper.  
Deposit old batteries at the relevant collection points.  
Please make use of the facilities available in your country for  
disposing of the packaging of the set in a way that helps to  
protect the environment.  
This electronic equipment contains many materials that can be  
recycled. Please inquire about the possibilities for recycling your  
old set.  
VIDEOPlus+ and PlusCode are trademarks of Gemstar Develop-  
ment Corpoation. The VIDEOPlus+ system is manufactured under  
licence from Gemstar Development Corporation.  
1
 
1. INSTALLATION  
Important for the United Kingdom  
Connecting the cables  
This apparatus is fitted with an approved moulded 13 Amp  
plug. To change a fuse in this type of plug proceed as follows:  
1 Remove fuse cover and fuse.  
2 Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI  
approved type.  
3 Refit the fuse cover.  
If the fitted plug is not suitable for your socket outlets, it should  
be cut off and an appropriate plug fitted in its place.  
If the mains plug contains a fuse, this should have a value of  
5A. If a plug without a fuse is used, the fuse at the distribution  
board should not be greater than 5A.  
2
1 Insert the aerial plug into the  
socket.  
If you use the auxiliary aerial supplied, push the aerial into the  
mounting on the back panel until it snaps into place.  
Pull out the telescopic rod(s) as far as required. Tilt and rotate  
the aerial until you have got the best picture quality.  
Note: * The severed plug must be destroyed to avoid a  
possible shock hazard should it be inserted into a 13A  
socket elsewhere.  
2 Insert the plug of the mains cable into the wall socket.  
3 Switch the set on. The power switch  
8
is located on  
How to connect a plug:  
the left side panel of the set.  
The wires in the mains lead are coloured in accordance with  
the following code:  
BLUE - ’NEUTRAL’ (’N’)  
BROWN - ’LIVE’ (’L’)  
Important notes for operation  
We advise you, from now on, to switch the set to standby  
STANDBY m  
using the  
the remote control.  
button on the front of the set or on  
1 The BLUE wire must be connected to the terminal which is  
marked with the letter ’N’ or coloured BLACK.  
When the set is in the standby mode, a small red lamp on  
the left of the front of the set will be alight.  
STOP h  
2 The BROWN wire must be connected to the terminal  
You can switch on with the  
button, the  
0-9  
which is marked with the letter ’L’ or coloured RED.  
buttons or by inserting a cassette.  
8
Attention: When you use the power switch  
on the  
side panel, you have completely switched off the set from  
the mains power supply. No programmed recordings will  
then be made. The red lamp on the left of the front of the  
set will not be alight. After a few hours, the date and clock  
settings will be lost.  
3 Do not connect either wires to the earth terminal in the  
plug which is marked with the letter ’E’ or by the safety  
\
earth symbol  
yellow.  
or coloured green or green-and-  
Attention: Before you switch off the appliance with the  
8
Before replacing the plug cover, make certain that the cord  
grip is clamped over the sheath of the lead - not simply over  
the two wires.  
power switch  
, remove the tape by pressing the  
J
button.  
Keep your TV Combi connected to the mains and the  
power switch in ’on’ position at all times to ensure that  
programmed recordings can be made and that the  
television functions normally. The power consumption  
required is low.  
Back-up power supply: TV channel storage - typically 1  
year, Clock/Timer - typically 30 hours.  
2
 
Connecting additional equipment  
Making standard settings  
EXTERNAL  
STOP h  
You can also connect additional equipment to the  
1 To start, press the  
button. Press the menu  
D
C
socket, for instance, a decoder satellite receiver or camcor-  
der.  
buttons  
and  
simultaneously.  
INSTALLATION  
v w  
LANGUAGE  
COUNTRY  
EN  
GB  
AUTO STORE  
MANUAL STORE  
SORT  
PP STORE  
2 Select the required display language in the ’LANGUAGE’  
Emergency interrupt  
line.  
3 Select your country in the ’COUNTRY’ line.  
Both the set and the remote control have an ’Emergency  
STANDBY m  
interrupt’ button. You can use the  
terrupt any function.  
button to in-  
STANDBY m  
To interrupt a TIMER recording, press the  
ton several seconds.  
but-  
Setting the clock and date  
Whenever you have operating problems you can simply  
interrupt the function and start again.  
You can practise operating your set without any worries. No  
matter which buttons you press, you cannot damage it.  
STOP h  
1 To start, press the  
button.  
MENU  
2 Press the  
button.  
3 Select and confirm the line ’FEATURES’ .  
User guide  
4 Select and confirm the line ’SET CLOCK’ .  
With OSD (On Screen Display) the corresponding functions  
appear on the TV-screen. The most important button-functions  
are displayed at the bottom of the screen.  
SET CLOCK  
TIME  
YEAR  
MONTH  
DATE  
20:00  
1997  
01  
Throughout this instruction manual, use the following buttons  
for the functions ’Call up’, ’Select’, ’Enter’/’Adjust’, ’Confirm’  
01  
and ’Exit’:  
x y 0-9  
MENU  
Call up: Use the  
button.  
A
D
B
Select: Select a line with the  
or  
or  
button.  
menu but-  
5 Enter the time, year, month and date.  
0-9  
C
Use the  
buttons or the  
ton to select within a line.  
D
C
0-9  
Enter/Alter: With the  
or  
or with the  
button.  
OK  
Confirm: With the  
button.  
MENU  
Exit: With the  
.
3
 
Automatic Channel Search  
Allocating channel numbers  
STOP h  
STOP h  
1 Switch on with the  
button. Press the menu  
1 Switch on with the  
button. Press the menu  
D
C
D
C
buttons  
and  
simultaneously.  
buttons  
and  
simultaneously.  
2 Select and confirm the line ’AUTO STORE’ .  
2 Select and confirm the line ’SORT’ .  
The ’Automatic Channel Search’ function starts.  
SORT  
v w  
AUTO STORE  
C-21  
P01  
FROM  
TO  
PRESS x y TO STOP  
P02  
STORE  
SEARCH  
PLEASE WAIT  
CHANNELS FOUND:  
1
aaabbbbbbbbbbbbbbbbb  
3 On the TV screen, in the line ’FROM’ , select the TV  
channel to which you want to allocate a programme  
number, e.g.: ’P 01’ .  
3 Wait until all TV channels have been stored.  
All TV channels will be stored from programme number  
69 downward.  
4 In the line ’TO’ , select the required programme number,  
How to search for a TV channel manually, you can read in  
chapter 4 ’SPECIAL FEATURES’ in the section ’Manual  
channel search’.  
e.g.: ’P 02’ .  
5 Select and confirm the line ’STORE’ .  
The allocated TV channels will be exchanged.  
Note:  
* If the ’Automatic channel search’ function is activated,  
any previously programmed TIMER blocks will be  
cleared.  
6 Repeat steps 3to 5until you have allocated a pro-  
gramme number to all the required TV channels.  
MENU  
To finish, press the  
button twice.  
You can store up to 69 TV channels.  
4
 
2. PLAYBACK  
1 Insert a cassette into the cassette slot.  
Tape position/Index search  
GPLAY  
2 Press the  
playback button.  
OK  
Tape position: If you press the  
button the tape position  
H
I
3 Picture search: Now press the  
(rewind) or  
will be shown in the display during Wind, Rewind, Record,  
Playback and Pause/Stop.  
(wind) button once or several times.  
STOP h  
4 Interrupt: Press the  
button.  
Index search: Every time you start to record, the tape is  
marked with a code mark.  
H
5 Wind: Stop the tape and press the  
(rewind) or the  
I
INDEX E  
I
(wind) button.  
1 Press the  
button. Press the  
button to  
button for the  
H
select the next code mark or the  
previous code mark.  
J
6 Eject: Press the  
button on the set.  
Note: Some functions switch off automatically after a  
while (e.g.: Pause, Still Picture, Scanning). This helps to  
protect the cassette and prevent unnecessary power  
consumption.  
* With this set you can play back cassettes that have  
been recorded on another TV Combi in the NTSC  
standard.  
* If you load a cassette with erase protection, the TV  
Combi starts playback automatically.  
* The picture quality is affected during scanning. The  
sound is switched off.  
* Remove the cassette before transporting the TV  
Combi.  
2 Once the TV Combi finds the code mark or unrecorded  
area it will automatically switch to playback.  
Note: When you press any tape transport button (e.g.:  
H
I
the  
stopped.  
or  
button) this search function will be  
* You cannot use this function with recordings made on  
another video recorder that does not have this function.  
Eliminating picture interference  
MENU  
1 During playback press the  
button.  
2 Select and confirm the ’SPECIAL’ line.  
Still picture  
3 Select the ’TRACKING’ line.  
STILL R  
1 Press the  
button. You see a still picture.  
D
C
4 Press the  
or  
button until the playback  
Interference stripes will appear.  
quality is at its best.  
STILL R  
Each time you press the  
button again the pic-  
ture will move on one step.  
MENU  
5 Press the  
button. This setting will remain until  
you remove the cassette.  
MENU  
6 Cleaning function: Press the  
button.  
Continuous playback  
7 Select and confirm the ’SPECIAL’ line.  
MENU  
1 Press the  
button.  
8 Select the ’CLEANING’ line.  
2 Select and confirm the ’SPECIAL’ line.  
OK  
9 Press the  
button. A blue screen appears for a few  
3 Select the ’REPEAT PLAY’ line. Switch on the continuous  
seconds.  
playback.  
0 Wait until the blue screen disappears and press the  
MENU  
4 Press the  
button.  
MENU  
button.  
GPLAY  
5 Start the continuous playback with the  
playback  
Note:  
button.  
* Some hired cassettes may have a poor picture/sound  
quality. This is not a fault in your set.  
6 If you want to cancel the function, stop the continous  
playback in the ’REPEAT PLAY’ line.  
5
 
3. RECORD  
1 Insert a cassette.  
Programme a recording  
P p  
2 Use the  
button to select the programme number  
The set needs the following information for every pro-  
grammed recording:  
from which you wish to record, e.g.: ’P 01’ .  
RECORD n  
3 Press the  
button.  
* the date on which the recording is to be made  
* the programme number for the TV channel  
* the start and end time of the recording  
* VPS/PDC on or off  
STOP h  
4 Use the  
button to stop the recording.  
5 If, whilst recording, you want to switch off the TV screen,  
STANDBY m  
press the  
button once.  
The set stores all the information mentioned above in what is  
known as a TIMER block. It can store 6 TIMER blocks for up  
to one month in advance.  
P p  
To switch the TV screen on again, press the  
button.  
Important notes for recoding  
’VPS’ (Video Programming System)/ ’PDC’  
(Programme Delivery Control)  
OTR: If you do not want to record to the end of the  
RECORD n  
cassette, press the  
button again. The display  
shows at what time the recording will stop.  
D
C
With the  
or the  
button you can change the  
With ’VPS/PDC’, the TV station controls the start and the  
duration of a programmed recording. This means that the  
video recorder switches itself on and off at the right time  
even if a TV programme you have programmed begins earlier  
or finishes later than expected.  
Usually the start time is the same as the ’VPS/PDC’ time. If,  
however, a different ’VPS/PDC’ time is given, e.g.: ’20.15  
(VPS/PDC 20.14)’, you have to enter ’20.14’ (the ’VPS/PDC’  
time) exactly to the minute.  
end time of the recording in 30 minute intervals.  
If you wish to cancel the end time, press the  
button. This does not effect the recording.  
Programme number ’E1’ is provided for recording from  
external sources (via the  
Programme number ’AV’ is provided for recording from  
external sources (via the front socket).  
Erase protection: So that you don’t accidentally delete an  
important recording, you can remove the special tab  
(erase protection) on the narrow side of the cassette with  
a screwdriver or slide the special tab to the left.  
Later, if you no longer want the cassette to be erase  
protected, you can seal the gap again with adhesive tape  
or slide the special tab to the right.  
CLEAR  
EXTERNAL  
scart socket).  
If you are not using ’VPS/PDC’, the ’VPS/PDC’ indication must  
be off.  
Auto-assembling: You can use the auto-assembling func-  
tion to join individual recordings without any major  
picture disturbance between the recordings.  
Search for the correct position on the tape and then stop  
STOP h  
the playback by pressing the  
appears in the display.  
button. ’PAUSE’  
Now start recording as usual by pressing the  
RECORD n  
button.  
MENU  
Long play: Before recording, press the  
Select and confirm the ’SPECIAL’ line.  
Select and confirm the ’TAPE SPEED’ line.  
button.  
Select the ’LP’ (=LongPlay) recording speed and stop by  
MENU  
pressing the  
button.  
During playback the TV Combi will automatically select  
the correct playback speed.  
6
 
Programming with ’VIDEOPlus+’  
How to enter, check or clear a TIMER  
block manually  
All the information required for programming is encoded in  
the ’VIDEOPlus+’ code.  
TIMER k  
1 Press the  
button.  
SV/V+  
1 Press the  
button on the remote control.  
2 Select a free TIMER block or the TIMER block you want  
to check or clear.  
2 Enter the entire ’VIDEOPlus+ code’. This code (up to 9  
digits) is found next to the start time of a TV programme  
in your TV guide.  
CLEAR  
3 Clear: Press the  
button.  
If you entered an incorrect code number, clear it with the  
D
C
4 Enter/Check: Press the  
or  
button to switch  
CLEAR  
button.  
between ’DATE’ (date), ’DW’ (daily, weekly), ’PR’ (pro-  
gramme number), ’START’ (start time) and ’END’ (end  
time).  
VIDEOPLUS  
CODE  
A
B
0-9  
Press the  
change the data.  
and the  
, or the  
buttons to  
DAILY/WEEKLY  
PROGRAMME NR.  
ONCE  
01  
MENU  
5 To end programming, press the  
button.  
STANDBY m  
x y 0-9  
OK  
6 Press the  
button.  
3 If you want to repeat programming at daily or weekly  
intervals, select the required setting in the ’DAILY/WEEK-  
LY’ line.  
Important notes for programmed recordings  
If the message ’PLEASE PRESS STOP’ or ’PLEASE PRESS  
STANDBY’ appears on the TV screen, press the  
’Daily’ programming can only be used for recordings to  
be made from Mondays to Fridays inclusive.  
STOP h  
STANDBY m  
or the  
button.  
A TIMER recording will function only, if the set isn’t used  
for other video recorder functions (e.g.: playback).  
The TIMER lamp on the front of the set lights up when  
one or more of the TIMER blocks are occupied.  
If the end of the cassette is reached during a recording,  
the video recorder automatically ejects the cassette. The  
set switches off after a few minutes.  
If you forget to load a cassette, ’NO CASSETTE CANNOT  
RECORD’ will appear.  
If you inserted a cassette with erase protection when you  
want to start a recording, the cassette will be ejected.  
If ’CODE ERROR’ appears on the TV screen, you entered  
4 After the confirmation the corresponding data appears on  
the TV screen.  
Note: If you use ’VIDEOPlus+’ for the first time, the  
’PROGRAMME NR.’ line appears when you enter the  
’VIDEOPlus+’ code. Enter the required programme num-  
ber for this TV channel.  
DATE DW PR START END  
d
01  
01 17:15 18:45  
an incorrect code number or the incorrect date. Repeat  
STANDBY m  
the entry or end with the  
button.  
With ’Daily’ programming, the first recording must take  
place within a week.  
v w x y 0-9  
OK  
If ’DAILY ERROR’ appears on the TV screen, the date was  
incorrectly entered. ’Daily’ programming can only be used  
for recordings to be made from Mondays to Fridays  
inclusive.  
The programmed recording will always be made at the  
recording speed (SP/LP) that has already been selected  
on the TV Combi.  
OK  
5 Confirm with the  
button.  
The data has been stored in a TIMER block.  
Please ensure that you loaded a cassette without erase  
protection.  
STANDBY m  
6 Press the  
button.  
7
 
4. SPECIAL FEATURES  
3 Select the ’DISPLAY’ line.  
How to read TELETEXT  
TELETEXT e  
Press the  
button to switch the TXT decoder  
4 Select one of the options indicated.  
’FULL’: OSD appears for a few seconds each time an  
operating mode is selected and then disappears.  
’OFF’: OSD is switched off.  
on and off. The TV-VIDEO Combi is now receiving the TXT  
of the TV channel currently selected.  
To store the current page, press the  
If you want to select an other page, type in the number  
OK  
button.  
’PROG’: only the programm number appears.  
’COUNT’: only the counter appears.  
0-9  
with the digit buttons  
.
MENU  
5 Confirm it with the  
button.  
Extra TELETEXT functions  
If you want to superimpose the clock time, press the  
OK  
Note: With the  
button you can superimpose the  
CLOCK .  
button.  
actual operating mode on the TV screen.  
If you want to go to TELETEXT page 100, press the  
INFO ,  
button.  
If you want TELETEXT to be shown transparently, press  
TRANSP. -  
the  
button.  
Personal Preset  
MENU  
To use the extra TELETEXT functions, press the  
ton, when you are in TELETEXT.  
but-  
You can make your personal picture and volume settings  
here. You can call up this setting and it will be used  
automatically when you switch the set on.  
To enlarge the print, select the symbol ’ e; ’ and confirm  
OK  
with the  
button.  
To switch off the TELETEXT decoder temporarily, select  
OK  
the symbol ’ eX ’ and confirm with the  
button.  
1 Select your personal setting. (see chapter ’The TV set  
To call up a sub-page:  
D
C
functions’). Press the menu buttons  
button simultaneously.  
and  
OK  
1 Select the symbol ’ /00 ’ and confirm with the  
but-  
ton.  
2 Select and confirm the ’PP STORE’ line.  
2 Enter the page number of the sub-page.  
MENU  
3 To end, press the  
button. The personal setting  
To call up concealed information, select the symbol ’ e?  
has been stored.  
OK  
’ and confirm with the  
button.  
To stop the pages from being turned over, select the  
OK  
MENU  
symbol ’ STOP ’ and confirm with the  
button.  
4 Calling up your Preset: Press the  
button.  
5 Select and confirm the ’FEATURES’ line.  
On Screen Display (OSD)  
6 Select and confirm the ’PP RECALL’ line.  
You can switch OSD on or off.  
MENU  
7 Press the  
button. The set will use this setting.  
MENU  
1 Press the  
button.  
Sleep function (switch off)  
2 Select and confirm the ’FEATURES’ line.  
You can programme your set to switch off after a predeter-  
mined period.  
FEATURES  
v w  
PP RECALL  
ON TIMER  
MENU  
SLEEPTIMER  
DISPLAY  
0
1 Press the  
button.  
FULL  
OFF  
CHILD LOCK  
SET CLOCK  
2 Select and confirm the ’FEATURES’ line.  
8
 
3 Select ’SLEEPTIMER’ line.  
Manual channel search  
D
C
4 With the  
or the  
button you can determine  
In certain cases the Automatic channel search may not be  
able to find all of the TV channels (e.g.: coded TV channels).  
You can then use this manual method to set the channels.  
the minutes left until switch off in 15 minutes intervals.  
When you set the time to ’0’ with the  
sleep function is switched off.  
CLEAR  
button the  
STOP h  
MENU  
1 Switch on the set with the  
button. Press the  
5 Press the  
button.  
D
C
menu buttons  
and  
simultaneously.  
2 Select and confirm the ’MANUAL STORE’ line.  
Switch set on function  
You can programme your set to switch on at a predetermined  
time.  
MANUAL STORE  
v w  
CHANNEL/FREQ.  
SEARCH  
C-21  
1
FINE TUNING  
PROGRAMME NR.  
DECODER  
MENU  
1 Press the  
button.  
STORE  
2 Select and confirm the ’FEATURES’ line.  
3 Select and confirm the ’ON TIMER’ line.  
4 Determine the time you wish the set to switch on.  
3 Select the ’SEARCH’ line.  
C
4 Press the  
button as often as necessary, until you  
have found the right TV channel.  
5 Select the ’WAKE UP’ line and switch the ’on-timer’ on or  
off.  
Note:  
* If you want to allocate a decoder, switch the decoder  
MENU  
6 Press the  
button.  
D
C
function on or off with the  
’DECODER’ line.  
or  
button in the  
* If you want to change the automatic channel setting,  
select the ’FINE TUNING’ line.  
Child lock  
D
C
With the  
or  
button you can vary the auto-  
matic TV channel setting.  
MENU  
1 Press the  
button.  
Important: This re-tuning is only necessary and useful in  
special cases, e.g.: when there are stripes on the  
picture with cable-TV systems.  
2 Select and confirm the ’FEATURES’ line.  
3 Select the ’CHILD LOCK’ line.  
P p  
5 In the ’PROGRAMME NR.’ line use the  
button to  
select the required programme number, e.g.: ’P 01’ .  
4 Switch the child lock on or off.  
6 Select and confirm the ’STORE’ line.  
MENU  
5 Press the  
button.  
7 If you want to search for further TV channels, start again  
Note: If a button is pressed with the child lock ’on’,  
’CHILD LOCK’ appears for a few seconds in the display.  
* Programmed recordings are made despite the child  
lock and cannot be interrupted.  
at step 4.  
MENU  
To finish, press the  
button twice.  
9
 
Before you call an engineer  
If, contrary to expectation, you experience any difficulty in  
operating this TV Combi, please call the customer service in  
your country.  
You will find the telephone numbers in the enclosed guar-  
antee leaflet.  
The set does not respond to any button being pressed:  
No power supply.  
Technical disturbance: disconnect from the mains for 30  
seconds, then re-connect.  
The power switch on the side panel is switched off.  
Child lock is active.  
Cassette jammed:  
Don’t use force. Pull out the mains plug for a moment.  
Remote control does not operate:  
Remote control wasn’t pointed at the set.  
Batteries are exhausted.  
No playback on TV Combi:  
No recording on the cassette.  
No TV reception:  
The aerial is not connected.  
No TV channels have been stored.  
Poor playback from TV Combi:  
Cassette badly worn or of poor quality.  
Use the ’TRACKING’ function.  
No recording possible:  
TV channel not stored or wrongly selected.  
Cassette with erase protection has been loaded.  
Programmed recording does not function:  
TIMER not set properly.  
Time data wrongly programmed.  
A cassette with erase protection has been loaded.  
VPS/PDC switched on but ’VPS/PDC time’ wrong. Check  
aerial.  
This product complies with the requirements of the Directive  
73/23/EEC + 89/336/EEC + 93/68/EEC.  
TYPE  
VNxx  
14PV184/05  
SER.NR......  
10  
 

Peavey Portable Speaker 1264 H User Manual
Peavey Speaker ED 100 User Manual
Peavey Stereo Amplifier Multiplex Series User Manual
Philips Car Video System 190V User Manual
Philips Portable DVD Player AZ6880 17 User Manual
Philips Power Supply SPDS 60CA 24V User Manual
Philips Projector Accessories BDL425IV User Manual
Philips Universal Remote RFX600099 User Manual
Philips Work Light MFB User Manual
Porter Cable Satellite TV System DSR2210 User Manual