Manitowoc Ice Surge Protector 4004489 User Manual

TROUGH AND PROTECTOR ASSEMBLY  
Q-DUAL SERIES - 4004489  
Installation Instructions  
1.  
2.  
3.  
4.  
Remove front panel assembly.  
Remove splash shield.  
Remove and replace the water trough with the new trough provided in this service kit.  
If the machine is already equipped with trough protectors, use existing holes to attach. If not, continue with steps  
5-10.  
5.  
Position trough protectors over the rear edge of the trough, centering the guard between the arms of the sump (see  
Figure 1 and 2).  
6.  
7.  
Mark the screw position on the back bulkhead for each trough protector.  
Remove the trough protectors.  
8.  
9.  
Drill one 5/32” [3.9mm] diameter hole through the back bulkhead for each protector on the marks made in step 6.  
Reposition the trough protectors as in step 5.  
10.  
11.  
12.  
Drive the #10 hex head screws through each bracket into the holes made in step 8.  
Replace the splash shield.  
Replace the front panel assembly.  
Drill 5/32”  
hole in back  
bulkhead for  
#10 screw  
Trough Protector  
Q-DUAL  
Figure 2  
Figure 1  
Manitowoc Ice, Inc.  
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
8006713  
Rev. 06/17/03  
 

Land Pride Power Roller SBR48 User Manual
Lasko Fan 2554 User Manual
Leupold Binoculars 56113 User Manual
LG Electronics Clothes Dryer D5966G User Manual
LG Electronics Flat Panel Television SAC34026003 User Manual
Lux Products Thermostat PSP511 User Manual
Makita Saw 5007F R User Manual
Manitowoc Ice Ice Maker K00127 User Manual
Marantz Stereo Amplifier SM 1151 User Manual
Memorex CRT Television MT1130C User Manual